LARBON LogoLARBON Furniture Panels with continuous / long lamella (EGP = Edge glued panels)

 

In order to get the best output yield from the timber, the panels are available in lengths from 900mm to max. 3000mm in steps of 100mm (900mm, 1000mm, 1100mm..., 3000mm).
The common yield proportion is 50% under 2000mm lengths + 50% over 2000mm lengths.
As long lengths can be reached only with difficulty, prices rise significantly with increasing length.

 

Species of wood:

Stock Items: Beech lightly steamed, Beech Redheart, European Oak, Ash, Ash Brownheart, European Maple, American Black Walnut ("Black Walnut")
Produced on demand: Beech unsteamed, Europ. Cherry steamed


Different Variants concerning widths of lamella:

- Continuous stave with random widths of lamellas 40-90mm (Beech, Ash, Maple, Walnut)
- Continuous stave with fix widths of lamellas of 45-50mm (Oak, Birch)


Dimensions:

- Standard Thicknesses: 19mm, 26mm, 30mm, 40mm
- Special thicknesses: 16mm, 25mm, 27mm, 32mm 38mm
- Stock Lengths: 900mm - max. 3000mm
- Stock Width: 1210 mm
- maximum width: 1300mm


Quality Description:


A / B (Prime):
- Topside A: clean sorted, without redheart or brownheart , Oak without sapwood, knot-free, uniform colour and texture, no discoloration
- Bottomside B: no redheart or brownheart, no bigger knots, only some small pin knots allowed, color differences permitted, Oak sound sapwood up to 20% permitted

A / C (one side visible):
- Topside A: clean sorted, without redheart or brownheart, Oak without sapwood, knot-free, uniform colour and texture, no discoloration
- Bottomside C: Beech colorful, sound redheart permitted (0-100%), colour variations permitted, Oak sound sapwood without limitation, small pin knots allowed

B / C (one side visible):
- Topside B: without redheart or brownheart , Oak without sapwood, knot-free, not color sorted
- Bottomside C: redheart or brownheart permitted, no knots, color differences permitted, Oak sound sapwood permitted

Redheart (Beech, Ash):
- Topside: natural beech colorful, decorative redheart wanted, color variations permitted, no knots, no decay, no fungal discolorations
- Bottomside C: beech colorful, sound redheart permitted (0-100%), color variations permitted, oak some less sound sapwood permitted, small pin knots permitted

Oak Rustic B/B (decorative useage):
- Topside: closed pin knots and knots up to 25mm diameter permitted, knots both sides filled with black putty, colour variations permitted, no sapwood, no decay
- Bottomside B: Knots permitted, Knots both sides filled black, Sapwood without limitation, color variations permitted

 

Knotty Oak Rustic (decorative useage):
- Topside: closed pin knots permitted, open knots up to 35mm diameter wanted, knots both sides filled with black putty, colour variations permitted, no sapwood, no decay
- Bottomside C: Knots permitted, Knots both sides filled black, Sapwood without limitation, colour variations permitted

 



 

Moisture:

At the end of production, the moisture content is about 8 + / -2%, which corresponds to the equilibrium moisture content for indoor use with a healthy indoor climate of 20 ° C / 55% humidity.


Gluing:

All Solid wood panels are glued with brands tested glues fulfill class D3 / Oak D4 - according EN 204 (PVAC = formaldehyde-free white glue).
Areas of application are indoor areas (SWP/1) with frequent short-term exposure to running or condensed water and / or exposure to high humidity (SWP/2).
Outdoor areas (SWP/3) protected from the weather only on request.


Packaging:

Standard Stock widths 600, 800, 900, 1210, 1250mm always single foiled ("shrink wrapped")


Storage:

During transport or storage of solid wood panels, it can lead to moisture absorption.During storage and processing is therefore essential to ensure a uniform climate. It should be stored in closed, not be too dry or too damp rooms. The solid wood panels should be covered and just be fully supported. Note that the shrinkage and swelling capacity is about 0.6% per 1% change in wood moisture. Before further processing of solid wood panels, therefore, is to recommend an air-conditioning on the appropriate use of moisture.


Surfaces:

All Solid wood panels / glued panels are sanded with 100 grit. 80 grit or 120 if desired. This makes it possible to oil the plates depending on the desire to grow or paint. The top and bottom should in general have the same surface structure in order to avoid a possible delay.






LARBON Treppenplatten Massivholz

LARBON Treppenplatten Massivholz

LARBON Treppenplatten Massivholz

LARBON Treppenplatten Massivholz

Akzeptieren

Diese Website verwendet Cookies. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass Cookies gesetzt werden. Datenschutzerklärung